6. Carefully slide the headlamp assembly
forward approximately 1.2 in (30 mm),
do not remove the headlamp. Be
careful of the sharp fender edge, as it
could damage the headlamp.
7. Rotate the low beam bulb cap
counterclockwise and remove it from
the vehicle.
8. Disconnect the electrical connector
from the bulb.
9. Place your hand behind the headlamp
and push the retainer toward the lamp
and down.
10. Move the bulb retainer away from the
bulb and remove the bulb.
11. To install the bulb, reverse the
removal steps.
420
2024 Ranger (TRD) Canada/United States of America, enUSA, Edition date: 202304, DOM
Maintenance
To Next Page
Loading...
