FortiGate Voice - Configuring Dial Plans

PBX configuration FortiGate Voice web-based manager configuration reference
FortiGate Voice Version 4.0 Administration Guide
32 01-400-112851-20100127
http://docs.fortinet.com/ • Feedback
Configuring dial plans
You can configure a dial plan that includes dial plan rules in the PBX menu. A dial plan rule
indicates an outgoing destination to send calls to. You can add multiple rules to one dial
plan. Dial plans are used when configuring extensions that control how to handle outgoing
calls from the extension.
To configure a dial plan
1 Go to PBX > Call > Dial Plan.
2 Select Create New.
3 Enter a name for the dial plan in the Name Field.
4 If you want, add a description of the dial plan in the Comments field.
5 Select Create New.
When you select Create New, you will configure a new dial plan rule for the dial plan
that you are currently configuring.
6 Enter a name for the dial plan rule in the Name field.
7 Enter a dial pattern in the Pattern field.
A pattern always begins with an underscore _ and the pattern can include the following
characters:
• X matches numbers 0-9
• Z matches numbers 1-9
• N matches numbers 2-9
• [15-7] matches single digits 1, 5, 6, and 7
• . one or more digits
• ! zero or more digits.
The pattern _9X indicates that any number of digits 0-9 where the first digit is 9.
8 Enter the number of the digit to remove from the incoming number in the Strip field.
9 In Outgoing, select the PSTN interface and/or VoIP provider in the Available column list
and then use the -> arrow to move to the Selected column.
If you need to remove a PSTN interface or VoIP provider from the Selected list, select
the PSTN interface or VoIP provider and use the <- arrow to move it back to the
Available column list.
10 Select OK.
11 Repeat steps 5 to 9 to add multiple dial plan rules to the dial plan.
You can arrange the PSTN interfaces and VoIP providers in the Selected column using the
up and down arrows that are beside the Selected column. You must select a PSTN
interface or VoIP provider first and then use the arrows to arrange them in the list.
Voicemail
Extension
Select the voicemail extension number from the drop-down list. This option
appears only when Voicemail is selected in No Answer Action.
Member Select an extension in the Available column and then use the -> arrow to
move it to the Selected column.
To remove an extension from the Selected column, select the extension and
use the <- arrow to move it back to the Available column.