FortiGate Voice - Execute pbx Commands; Execute pbx-license

execute pbx FortiGate Voice VoIP, PBX, and PSTN CLI Reference
FortiGate Voice Version 4.0 Administration Guide
46 01-400-112851-20100127
http://docs.fortinet.com/ • Feedback
end
execute pbx
Use this command to view active channels and to delete, list or upload music files for
when music is playing while a caller is on hold.
Syntax
execute pbx active-call <list>
execute pbx music-on-hold {delete | list | upload}
Example command output
Enter the following command to view active calls:
execute pbx active-call
Call-From Call-To Duration
6016 6006 00:00:46
execute pbx-license
Use this command to enter a license key to be able to use the G729 codec for FortiGate
Voice calls.
execute pbx-license <license_key>
Variables Description Default
edit
<interface_name>
Enter the interface that you want to allow SIP traffic on. No
default
voip
{enable | disable}
Enable the VoIP SIP protocol for allowing SIP traffic on the
interface.
disable
Variables Description Default
active-call <list> Enter to view the active calls, in list format. No
default
music-on-hold
{delete | list |
upload}
Enter to either delete, list or upload music files. No
default