FortiGate Voice - Configuring Voicemail Notifications; Monitoring Calls

FortiGate Voice web-based manager configuration reference PBX configuration
FortiGate Voice Version 4.0 Administration Guide
01-400-112851-20100127 35
http://docs.fortinet.com/ • Feedback
Configuring voicemail notifications
When an employee receives a voicemail message, you can configure an SMTP server
that will send that voicemail message to the employee’s email address.
To configure a voicemail notification
1 Go to PBX > Config > Voicemail Notification.
2 Enter the SMTP server information in the SMTP Server field.
The SMTP server information can be either the SMTP server’s IP address or its
domain name.
3 If authentication is required, select the check box beside Authentication.
4 If you have selected Authentication, enter a user name and password in the User
Name and Password fields.
5 Select Apply.
Monitoring calls
You can monitor incoming and outgoing calls from PBX > Monitor. From the Monitor tab,
you can view each call and there duration. You can also filter the information that displays
on the page, as well as refresh the information.
The calls on the page can also be arranged in descending or ascending order, using either
the From, To, or Duration columns.
General VoIP provider settings
Name The name of the VoIP provider.
Server The server of the VoIP provider.
User Name The user associated with the VoIP provider.
Authorization User Name The authorized user for the VoIP provider.
Display User Name The name that displays on the phone’s LCD.
Account Type The type of account for that VoIP provider.
DTMF Method The type of DTMF method.
Delete icon Select to delete a VoIP provider.
Edit icon Select to change the settings of a VoIP provider.
VoIP provider configuration settings
Name Enter the name for the VoIP provider configuration.
Server Enter the server of the VoIP provider.
User Name Enter the name of the user.
Password Enter the password for the user.
Authorization User Name Enter the user name that is authorized for the VoIP provider.
Display User Name Enter the user name that will display on the phone’s LCD.
Account Type Select either Static or Dynamic as the account type. When you select
Dynamic, the Registration Interval is available for configuration.
Registration Interval Enter a number in seconds for the interval. This appears when
Account Type is set to Dynamic.
DTMF Method Select a DTMF method from the drop-down list.