FortiGate Voice - Config pbx smtp

config pbx smtp FortiGate Voice VoIP, PBX, and PSTN CLI Reference
FortiGate Voice Version 4.0 Administration Guide
42 01-400-112851-20100127
http://docs.fortinet.com/ • Feedback
config pbx smtp
Use this command to configure the FortiGate Voice unit to send voicemail notification
email messages. Using this command you configure the email server that the FortiGate
Voice unit sends email notifications to.
Syntax
config pbx smtp
set authenticate {enable | disable}
set password <password_str>
set port <smtp_server_port>
set server <smtp_server_ip_ address>
set username <username_str>
end
no-answer-action
{hangup | ivr |
voicemail}
Enter the action that will be taken when none of the
extensions in the ring group answers.
• hangup hand up and end the call.
• ivr return the caller to the attendant where they can
try another extension.
• voicemail the caller is directed to the voicemail
system where they can leave a message.
No
default
strategy {ring-all |
sequential}
Control how the extensions in the group are called by the
ring group.
• ring-all calls all of the extensions in the group at
the same time.
• sequential calls the extensions in the group one at a
time in the order in which they have been added to the
group.
No
default
voicemail-of-
extension
<extension_number>
Enter the extension number to use for voicemail if no one
answers the call and no-answer-action is set to
voicemail.
No
default
Variables Description Default
Variables Description Default
authenticate
{enable | disable}
Select enable if the email server requires authentication.
If you enable authentication you must also add a
username and password.
disable
password
<password_str>
Enter the password for the account on the email sever.
port
<smtp_server_port>
Enter the port number that the email server uses for
SMTP.
25
server
<smtp_server_ip_
address>
Enter the email server IP address or domain name. No
default
username
<username_str>
Enter a valid username for an account on the email server. No
default