FortiGate Voice - FortiGate Voice CLI Reference; Config pbx dialplan

FortiGate Voice VoIP, PBX, and PSTN CLI Reference config pbx dialplan
FortiGate Voice Version 4.0 Administration Guide
01-400-112851-20100127 37
http://docs.fortinet.com/ • Feedback
FortiGate Voice VoIP, PBX, and PSTN
CLI Reference
This section describes FortiGate Voice VoIP, PBX, and PSTN configuration settings. For
information about other FortiGate Voice CLI commands see the FortiGate CLI Reference.
This section describes:
• config pbx dialplan
• config pbx did
• config pbx extension
• config pbx global
• config pbx ringgrp
• config pbx smtp
• config pbx voice-menu
• config pbx voip-provider
• config system pstn
• config system interface
• execute pbx
• execute pbx-license
• diagnose pbx extension list
• diagnose pbx voip-provider list
config pbx dialplan
Use this command to add a dial plan and add rules to the dial plan. A dial plan rule
indicates an outgoing destination to send calls to. You can add multiple rules to a dial
plan. You add dial plans to extensions to control how to handle outgoing calls from the
extension.
Syntax
config pbx dialplan
edit <pbx_dialplan_name>
set comments <comment_string>
config rule
edit <rule_name_str>
set callthrough {fxo1 | fxo2 | fxo3 | fx04 |
<voip_providers>}
set dest-pattern <pattern_str>
set strip <digit_int>
end
end