Logging of PBX activities FortiGate Voice web-based manager configuration reference
FortiGate Voice Version 4.0 Administration Guide
36 01-400-112851-20100127
http://docs.fortinet.com/ • Feedback
Logging of PBX activities
After configuring PBX settings, you can configure logging of PBX activities and events. If
you are new to logging, see Logging and Reporting in FortiOS 4.0 User Guide before
proceeding.
To configure logging of PBX settings
1 Go to Log&Report > Log Config > Event Log.
2 Select the check box beside Enable to make the other event log options available.
3 Select the check box beside PBX event.
Viewing log messages
You can view the PBX activities and events from Log&Report > Log Access. The log
messages can be filtered so that you are viewing specific information, or you can display
them in Raw format. Raw format is the format of what a log message actually appears in
the log file.
To view PBX log messages, go to Log&Report > Log Access and then select the tab
associated with the logging device you chose to store logs on. For example, you want to
view PBX log messages from the FortiAnalyzer unit that they are on, so you select
Log&Report > Log Access > FortiAnalyzer.
For more information about log messages, see the FortiGate Log Message Reference and
also the Logging and Reporting in FortiOS 4.0 User Guide.
To Next Page
Loading...