120 Fortinet Inc.
Policy routing Network configuration
Figure 4: Sample DHCP settings
Viewing the dynamic IP list
If you have configured the FortiGate unit as a DHCP server, you can view a list of IP
addresses that the DHCP server has added, their corresponding MAC addresses, and
the expiry time and date for these addresses. The FortiGate unit adds these
addresses to the dynamic IP/MAC list and if IP/MAC binding is enabled, the
addresses in the dynamic IP/MAC list are added to the list of trusted IP/MAC address
pairs. For more information about IP/MAC binding, see “IP/MAC binding” on
page 166.
To view the dynamic IP list:
1 Go to System > Network > DHCP.
2 Select Dynamic IP List.
The dynamic IP list is displayed.
Figure 5: Example Dynamic IP list
To Next Page
Loading...
