Fortinet FortiGate 100 - Adding a Neighbors Filter; Adding a Routes Filter

128 Fortinet Inc.
Adding a neighbors filter RIP configuration
Adding a neighbors filter
You can select a single RIP filter or a RIP filter list to be the neighbors filter.
1 Go to System > RIP > Filter.
2 Add RIP filters and RIP filter lists as required.
3 For Neighbors Filter, select the name of the RIP filter or RIP filter list to become the
neighbors filter.
4 Select Apply.
Routes received from neighbors are filtered using the selected RIP filter or RIP filter
list.
Adding a routes filter
You can select a single RIP filter or a RIP filter list to be the routes filter.
1 Go to System > RIP > Filter.
2 Add RIP filters and RIP filter lists as required.
3 For Routes Filter, select the name of the RIP filter or RIP filter list to become the
routes filter.
4 Select Apply.
Routes sent by the FortiGate unit are filtered using the selected RIP filter or RIP filter
list.
Figure 3: Example RIP Filter configuration