Fig. 55 Example of Communication error
Failure to connect to the FossConnect Network server could be due to a number of
reasons, e.g., internet unavailability, firewalls in local IT-systems, blocked IP-
address ranges and port number in local Networks, etc. Contact the IT support team
for the installation site in question (or a person with similar responsibilities and
knowledge about the local IT system).
Also, check the time and date settings on the local PC. If the time differs too much
between the local PC and the FossConnect server, it will not allow you to connect.
LinkDiagnostic is a special FossConnect server only used for trouble shooting and
backup of QA samples. It is pre-filled and it is only necessary to tick the Active
box (which can be found on Network properties dialogue when clicking the Edit
button).
On the Import tab you can import a pre-made FossManager configuration file
(*.mcf), with prediction models, parameter profiles, products, etc., as well as
licenses for both prediction models and software features.
Fig. 56
For more options use the Local Configurator, where you can create new or edit
existing configurations.
To Next Page
Loading...
Need help?
General
