Fig. 85
Typically, these log files contain detailed, traceable information about the
instrument's operation, but they do not contain any sample data or results. This
command is used when log files are requested by your FOSS representative, e.g.,
for support issues.
Fig. 86
The PIN code must contain four to six digits.
Please make sure that you store the new pin code in a safe place.
Fig. 87
Manual Sample Transfer allows you to transfer samples from an instrument with
a lost internet connection to a FossConnect server. Temporary solution when a
connection has been lost. This is normally done automatically in the background.
Fig. 88
To Next Page
Loading...
