The equipment is CE labelled and complies with the following directives:
• EMC (ElectroMagnetic Compatibility) Directive 2014/30/EU
• LVD (Low Voltage Directive) 2014/35/EU
• Packing and Waste Directive 94/62/EC
• RoHS Directive 2011/65/EU
• WEEE Directive 2012/19/EU
• REACH Directive 1907/2006/EC
• FCC ID: 2AZ6MNIRSDS3
The instrument is only compliant if no changes or modifications are made to the
device.
NIRS DS3 / DS3 F is compliant with the requirement for RF exposure in US with
<50 mm separation distance between the user and/or bystander of the device.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
To Next Page
Loading...
