Foxtel iQ2 - Instant Rewind; Front-Panel Recording;Playback Indicator

To Next Page

To Previous Page

Setup

Using the FOXTEL iQ2

Instant Rewind

This is the length of time of the recording the FOXTEL iQ2 automatically

makes of the channel you are currently viewing. For more information,

see ‘Using Instant Rewind’ on page 17.

You can choose one of ﬁve settings: ‘Off,’ ‘5’, ‘15’, ‘30’ or ‘60’ minutes.

Add to start of recordings / Add to end of recordings

If you wish, you can add extra time to the start and/or end of

recordings. The same six settings are available for both of these items:

u Automatic – 2 minutes extra recording time will be added to the

scheduled start or end time of recordings;

u 0, 1, 2, 5 or 10 minutes – the extra recording time that will be

added to the scheduled start or end time of recordings.

u Extend 20mins – For all future recordings the red button will

appear with a title of Extend 20mins. After the red button on your

remote control has been pressed it will add a further 20 minutes

to the highlighted recording.

Note

If one recording immediately follows another, any extra time added

to the start and/or end of recordings may be dropped in favour of the

next recording.

Front-panel recording/playback indicator

You can change the way in which the playback indicator (see below)

on the FOXTEL iQ2’s front panel lights up. Three settings are available:

u Standard – the recording, play and/or circular indicators light up

if recording and/or playback is in progress.

u Off – the circular indicator is turned off, but the recording and/or

play indicators light up if recording and/or playback are in progress.

u Demo – (Demonstration) – all of the indicators light up in a

continuous sequence of operation.