EXTRA INFORMATION
77
Extra Information
v Replacing the batteries in the remote control
When the batteries in the remote control are running low, the
following message will appear on your TV screen.
To remove the message, press back. You may also see a ‘low battery’
symbol in the i-search banner (see right).
To replace the batteries, insert two AA batteries as follows:
1. Hold the upper part of the FOXTEL remote control in one hand.
With your other hand, push the catch on the battery cover
upwards and remove the cover by pulling it outwards.
2. Remove the old batteries.
3. Insert the new batteries. Be sure to match the + and – marks
on the batteries to their respective marks inside the battery
compartment.
4. Replace the battery cover, by inserting the tabs at the top of the
cover first, then pushing the cover into place.
✘ Don’t leave flat batteries in the remote control.
✔ Replace both batteries at the same time.
✔ Dispose of flat batteries in an environmentally-friendly way.
low-battery
symbol
To Next Page
Loading...