Foxtel iQ2 - High Definition Settings

Setup
70
Using the FOXTEL iQ2
High Definition Settings
Item Settings Comments
HD Output Resolution Auto*, 576p,
720p,1080i,
Pass Through
Set HD Output Resolution to best match your television’s
native resolution. Auto setting uses the HDMI connection
to your TV to ask the TV what is its preferred resolution,
if connecting via HDMI leave set to Auto. Pass Through is
not used in domestic settings and may result in excessive
channel change times.
4:3 Programme Display 14:9* Zoom in to reduce black side bars when displaying a 4:3
picture on a 16:9 TV.
Stretch Stretches a 4:3 picture to fill a 16:9 TV Screen, will cause
picture to appear distorted.
Pillar Box Displays 4:3 picture on a 16:9 television by putting black
bars either side of the picture.
HDCP Warning Settings All
Warnings*,
No Warnings,
Disable Only
Determines when you receive onscreen notices informing
you of restrictions due to HDCP.
HDCP Status HDMI
Off, HDCP
Successful,
HDCP Failed
This setting displays the results of the test for HDCP
support in your television via the HDMI connection.
* Indicates Default Setting