Foxtel iQ2 - FOXTEL iQ2

FOXTEL iQ2
78
Using the FOXTEL iQ2
L, R, U and D
buttons
While you are
looking at screens
- to move the
highlight and
change what
is displayed on
screen
While you are
watching TV -
U and D change
the channel
select button
To confirm a
choice or make a
selection
Behind pull-down door:
smartcard slot
To insert the FOXTEL Smartcard
USB (Universal Serial Bus)
For future use
reset button
To reset the FOXTEL iQ2
remote control sensor
Window that receives the signal from
the remote control (do not block)
rewind button
To rewind the programme
pause button
To pause the programme or
start a ‘Live Pause’ recording
fast forward button
To fast forward the programme
stop button
To stop playback of the
programme
play button
To play the programme
REC
record button
To record the programme
S
button
To switch the FOXTEL
iQ2 into or out of
standby
Lights up red when
the FOXTEL iQ2 is in
standby
Lights up blue when
the FOXTEL iQ2 is out of
standby (switched on)
tv guide button
To display the
TV guide
back button
To remove a screen
and go back to the
previous screen
message light
Lights up blue when there is a message waiting
Flashes blue when it is an important message
online light
Lights up blue when the FOXTEL iQ2 is online
(using your telephone line)
Flashes blue when the FOXTEL iQ2 is sending or
receiving information
ir receive light
Flashes blue when the FOXTEL iQ2 receives a
signal from the remote control
signal light
Lights up red if the FOXTEL iQ2 is not receiving a
signal
Playback indicator
Lights up when the FOXTEL iQ2
is playing or recording (see
also page 70)
v Front panel