Setup
68
Using the FOXTEL iQ2
v Using the Advanced Settings
You shouldn’t normally need to change the System Settings as the
FOXTEL iQ2 should have been correctly set up when it was installed.
However, the System Settings screens can be useful if, for example,
you buy a new TV and you want to make sure the FOXTEL iQ2
makes the best use of the new TV’s features.
1. To use the System Settings screens, press active on the
remote control.
2. Highlight ‘Setup’, then press select.
3. Highlight ‘Advanced Settings’, then press select.
The Advanced Settings screen displays on your TV.
4. To display one of the Settings screens, highlight it and press
select.
The details of each screen are described in the following sections.
To Next Page
Loading...