Foxwell NT530 Plus - System Setup; Language and Unit Configuration; Wi-Fi and Network Setup

26
NT530 Plus User’s Manual_English_V1.03
● Service $09 - request Vehicle Information
●
Service $0A - permanent diagnostic trouble codes(DTCs)(cleared DTCs)
When OBDII/EOBD application is selected from Home screen, the scanner starts to detect the communication
protocol automatically. Once the connection has established, a menu that lists all of the tests available on the
identified vehicle displays. Menu options typically include:
● System Status
● Read Codes
●
Freeze Frame Data
● Clear Codes
● Live Data
● I/M Readiness
● O2 Sensor Test
●
On-board Monitor Test
● Component Test
● Vehicle Information
●
Modules Present
● Code Lookup
NOTE
Not all function options listed above are applicable to all vehicles. Available options may vary by the year,
model, and make of the test vehicle. A “Not supported the mode!” message displays if the option is not
applicable to the vehicle under test.
6 System Setup
This section illustrates how to program the scanner to meet your specific needs.
When Settings is selected, a menu with available service options displays. Menu options typically include:
● WIFI
● Language
● Unit
● Uninstall
● Shortcuts
● Beep Set
● Display Test
● Keypad Test
● About
6.1 Select Language
Selecting Language opens a screen that allows you to choose system language. The scan tool is set to display
English menus by default.
To configure system language:
1. Scroll with the arrow keys to highlight Language from Settings menu and press ENTER key.