13
NT530 Plus User’s Manual_English_V1.03
4.1.2 System Selection
When you have completed the identification of a vehicle, a menu for selecting system to test displays. Menu
options typically include:
● Quick Scan
● Control Modules
4.1.2.1 Quick Scan
Quick Scan performs an automatic system test to determine which control modules are installed on the vehicle
and obtain diagnostic trouble codes (DTCs) overview. Depending on the number of control modules, it may
take 10 minutes or longer to complete the test. However, if you have used the Models (Guide Function) to
identify the vehicle, it takes much shorter time to determine the installed controllers.
To perform an automatic system scan:
1. Scroll with the arrow keys to highlight Quick Scan from the menu and press ENTER to start.
Figure 4-2 Sample Selected System Scan Screen
2. To pause the scan, press the function key corresponding with Pause on the screen.
Figure 4-3 Sample Automatic System Scan Screen
3. At the end of successful automatic controller scan, a menu with a list of installed controllers together with
their DTC overview displays.
To Next Page
Loading...
