Foxwell T1000 - RKE & RF Monitor

22
T1000 TPMS Service Tool Manual_English_V1.01
Figure 4-21 Sample Programming Success Screen
5 RKE & RF Monitor
This section illustrates how to check RF Remote Keyless Entry (key FOB) with the tool. The
T1000 tests 315MHz and 433MHz key fobs only, and checks only for a signal present.
To test the check RF Remote Keyless Entry:
1. Scroll with the UP/DOWN arrow keys to highlight RKE & RF Monitor from the Main Menu and
press the YES key to start.
Figure 5-1 Sample Application Menu
2. Hold the Key Fob close to the tool, and press the function buttons on the FOB. If the button
works and the FOB is sending a signal, the tool will beep and the following screen displays.
Figure 5-2 Sample RKE& RF Monitor Screen