31
T1000 TPMS Service Tool Manual_English_V1.01
Figure 8-2 Sample Tool Information Screen
3. Press any key to exit and return to the Setup menu.
9 Update
The scanner can be updated to keep you stay current with the latest development of diagnosis. This
section illustrates how to register and update your scan tool.
To update your scanner, please follow the three steps as below:
Step1: Obtain an FOXWELL ID.
Step2: Register the product with the product serial number.
Step3: Update the product by the update application FoxAssist.
For step 1 and 2, you can also go to our site with the link below.
Step 1: http://www.foxwelltech.us/support-detail-216.html
Step 2: http://www.foxwelltech.us/support-detail-621.html
9.1 Create a Foxwell ID
9.1.1 Register through Website
If you are new to FOXWELL, please register on www.foxwelltech.us and create a FOXWELL ID
first. If you have installed the update application FoxAssist, please refer to the registration guide on
9.1.2.
1. To register through website:
To create a Foxwell ID and register your scan tool
a. Visit our site www.foxwelltech.us and then select Support>Register.
Figure 9-1 Sample Register Screen
b. Click Register link at the top right of the website or at the lower side of home page.
To Next Page
Loading...