Foxwell T1000 - System Setup; Language

24
T1000 TPMS Service Tool Manual_English_V1.01
Figure 6-3 Sample Delete Data Screen
3. If previous recording is to be cleared, press YES. Position the tool properly as illustrated in
Table 4-1 on page 14 and 15 and press the Test key. If in all wheel test mode, follow steps 1-3
of Activation in All Wheel Mode to complete the test. If in one wheel test mode, follow steps
1-3 of Activation in One Wheel Mode to complete the test.
4. If previous recording not to be cleared, press NO to review the record on screen.
7 System Setup
This section illustrates how to program the TPMS Service Tool to meet your specific needs.
When Setup application is selected, a menu with available service options displays. Menu options
typically include
●
Language
●
Area
● Beep Set
● Automatic Power-off
● ID Format
● Pressure Unit
● Temperature Unit
● Tire Test
7.1 Language
Selecting Language opens a screen that allows you to choose system language. The TPMS
Service Tool is set to display English menus by default.
To configure system language
1. Scroll with the UP/DOWN arrow keys to highlight Language from Setup menu and press the
YES key.