FP PostBase - Page 19

Installation and commissioning
19
Connection settings
Standard settings are stored in the PostBase
for communication between the mailing sys-
tem and the FP infrastructure. Establishing
the connection should run seamlessly with
these settings.
• Press C
ONTINUE to resume.
Note
: In order to change the settings, the
PostBase opens a procedure, during the
course of which you select the appropriate
settings for your network on a step-by-step
basis. If necessary, ask your network
administrator.
R-PIN
• Enter the Repository-PIN (R-PIN).
• Press C
ONTINUE to resume.
Synchronisation, software download …
• Follow the information and instructions on
the display.