PostBase mailing system with Dynamic Scale
38
• Now slide the letter stack into the light bar-
rier in the running direction of the letters.
• Release the press-down bar from the
retaining position with a light pivoting
movement up and to the right, and set it
down on the letter stack.
The press-down bar stabilises the letter stack
and should be used with all types of mail.
Processing starts automatically.
The mail pieces are seperated from the
stack, moistened and sealed if necessary,
weighed, franked and stacked in the catch
tray ready for mailing.
You process single letters in the same way.
In place of the letter stack, simply place a
single letter / a postcard on the Ramp plus.
With batch processing, you also have the
option of stipulating a unit quantity before
franking. To learn more about the batch
counter, please read the reference guide.
If ‘dynamic weighing’ is active, the label
printing function is not active.
To Next Page
Loading...
