ELA100 Rev0604
30
Ford Torque Lock-up Module (6.0 L Engines)
The torque lock-up module (PRO-54-INT) is used with automatic transmissions
to provide a third gear lock-up signal. TheRPM for the green wire to go low and
engage the third gear lock-up is factory set. If this setting needs to be changed, contact
FRC.
Green wire will go low when the engine
RPM goes above the program third gear
lock-up setting.
From Pin 7
(See Sheet 2)
FRC Torque
Lock-up Module
Black
Wire
Red
Wire
+12 VDC
GND
White
Wire
Blue
Wire
Green
Wire
Brown/Orange
Wire
To PCM
Pin 14
Locate the Brown/Orange trace wire,
Circuit 12A650, in the harness bundle
that passes over the transmission.
To Transmission
Torque Converter
Pin 8
(C1385 Torque
Converter Clutch
Solenoid)
Figure 10. Ford 6.0L ELA106-B Wiring
(Sheet 3 of 3)
To Next Page
Loading...
