5
REMOTE CONTROLS
You can purchase two types of Heart Interface remote controls
to use with your Freedom Inverter/Charger:
1. Remote Control Panel
2. LINK instruments
Installation and operations instructions for your remote
control are packed with the panel.
Remote Control Panel
The remote control panel has:
• LED bar graphs to show you the battery voltage and DC
current in both inverter and charger modes.
• Easy to see red, yellow and green LEDs to show you the
state of the battery charge.
• Controls for charger ON/OFF, inverter ON/OFF and
Power Sharing.
• Set up features includes selection of Idle Threshold, Bat-
tery Type and Battery Capacity.
LINK Instrument
Heart Interface offers three advanced remote control panels:
LINK 1000, LINK 2000, and LINK 2000R. All LINK instru-
ments provide:
• State of the battery charge information. This includes the
DC voltage, current, amp-hours consumed, how much
time remains on the batteries and historical data.
• Freedom Inverter/Charger controls
LINK 1000
The LINK 1000 provides information and controls for a single
battery bank. It also measures the voltage of an auxiliary
battery.
To Next Page
Loading...
Need help?
General
