Transmission allows the driver to turn the creep
mode or eCoast feature on or off. See
Fig. 3.18. See
"Instruments and Systems: ICUC" in this chapter for
more information.
Engine Idle Adjust allows the driver to adjust or
deactivate the engine idle. It is not available when
the vehicle is in motion. See
Fig. 3.19. For more
information see "Instruments and Systems: ICUC" in
this chapter.
Power Take Off allows the driver to customize the
amount of power being transferred. See
Fig. 3.20.
The Optimized Idle screens allow the driver to
choose the optimized idle mode and enable or
disable the feature. For more information see
"Instruments and Systems: ICUC" in this chapter
Software Updates
A software update consists of three steps:
1.
Downloading the software.
2.
Installing the software.
3.
Activating the software by restarting the system.
A popup message will appear when an update is
available. In addition, the software update option in
the diagnostics menu will be active.
The vehicle must be in neutral gear, the parking
brake set, and the engine off before a software
f61163804/29/2019
Fig. 3.17, Quick Access Screen: Cruise Control
f61163904/29/2019
Fig. 3.18, Quick Access Screen: Transmission
f61164004/29/2019
Fig. 3.19, Quick Access Screen: Engine Idle Adjust
Instruments
3.10
To Next Page
Loading...
