Frequency Devices 9002 User Manual

25 Locust St, Haverhill, Massachusetts 01830 • Tel: 800/252-7074, 978/374-0761 • FAX: 978/521-1839
e-mail: sales@freqdev.com • Web Address: http://www.freqdev.com
Model 9002
September 1999

Dual-Channel Programmable Filter Instrument
OPERATOR MANUAL
-Certified

Frequency Devices 9002 Specifications

General

Brand	Frequency Devices
Model	9002
Category	Water Filtration Systems
Language	English

Summary

Warranty & Repair

Section 1: Introduction

1.1 Device Description

Overview of the Model 9002's filtering capabilities and configurations.

Section 2: Instrument Description

2.1 Front and Rear Panel Controls

2.3 Filter Properties

2.4 Electrical Specifications

Electrical parameters like line voltage, power, channels, frequency range.

2.4.2 Physical Specifications

2.4.3 Environmental Specifications

Section 3: Installation and Setup

3.1 Unpacking and Inspection

3.4 Line Voltage Selection

3.5 Basic Setup

Section 4: Operation from the Front Panel

4.1 Front Panel Description

4.3 Function Keys

Section 5: Remote Control Operation

5.1 The Control Method

How remote control is conveyed via IEEE-488 bus and system addressing.

5.2 Programming Rules

Guidelines and structure for programming the Model 9002 using codes and commands.

5.3 Key-Push Commands

5.4 Special Command Codes

Special codes for advanced functions not available or necessary under local control.

5.5 Example of a Remote Control Program

An example program demonstrating setup and status reporting via remote control.

Appendix C: Remote Control Programs

Program 1: Set Filter Configuration

Example program using Code $06 to set filter parameters via PC and IEEE-488.

Program 2: Send Back Channel Status

Example program using Code $0C to retrieve channel status via PC and IEEE-488.