Fritz!Box 4040 - Obtaining an IP Address Automatically

Obtaining an IP Address Automatically
Overview
Network devices that are to obtain their IP address automatically by
DHCP must be configured accordingly. This configuration is performed
on the operating system level in the IP settings of the network devices.
Obtaining an IP Address Automatically in Windows
1. In Windows10, click on “Start”.
In Windows8, press the Windows key and the Q key at the same
time.
2. Enter “ncpa.cpl” in the search field and press Enter.
3. Click on the network connection between the computer and the
FRITZ!Box with the right mouse button and select “Properties”.
4. Under “This connection uses the following items”, select
“Internet Protocol Version4 (TCP/IPv4)”.
5. Click on the “Properties” button.
6. On the “General” tab, enable the options “Obtain an IP address
automatically” and “Obtain DNS server address automatically”.
7. Save with “OK”.
8. Enable the options “Obtain an IP address automatically” and
“Obtain DNS server address automatically” for the internet pro-
tocol version6 (TCP/IPv6) as well.
The network device receives an IP address from the FRITZ!Box.
FRITZ!Box4040 110
User Interface: Home Network Menu
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •