Fritz!Box 4040 - Selecting Signaling of the “Info” LED

Selecting Signaling of the “Info” LED
Overview
The “Info” LED signals various events. Some events are preset and
configured permanently; see page21. In addition to this, the “Info”
LED can be assigned to display another event of your choice.
Example 1
You would like to be notified about new messages on the answering
machine. The “Info” LED flashes when there are new messages on the
FRITZ!Box answering machine. The LED stops flashing as soon as all
new messages have been heard.
Example 2
You would like to be notified when the data or time included in your in-
ternet package, stipulated in the “Internet / Online Monitor / Online
Meter”, has been exhausted. The “Info” LED will then flash when the
configured volume has been exceeded.
Instructions: Selecting the Signaling of the “Info” LED
1. Open the user interface; see page46.
2. Select “System / Buttons and LEDs / 'Info' Display.”
3. For instructions, open the online help .
FRITZ!Box4040 146
User Interface: System Menu
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •