Fritz!Box 4040 - Using the Wizard for Basic Configuration

Using the Wizard for Basic Configuration
Overview
The first time the user interface is opened, the Wizard for Basic Config-
uration of the FRITZ!Box is started. This wizard assists you in entering
your account information for internet access.
The wizard can be restarted at any time via the “Wizards” menu in the
FRITZ!Box user interface.
Requirements
• The FRITZ!Box password has been supplied. The preconfigured
FRITZ!Box password is printed on the FRITZ!Box service card
“FRITZ!Notes” and on the type label on the bottom of housing.
• The account information has been supplied by your internet service
provider.
Instructions: Using the Wizard for Basic Configuration
1. Enter the preset FRITZ!Box password and click on “Log In”.
2. Choose whether you would like to use the AVM services for diag-
nostics and maintenance. We recommend leaving this option en-
abled. You can always change the setting later.
3. Click on “Next”.
4. Follow the wizard’s instructions.
Once the wizard is complete, the basic configuration of the FRITZ!Box
has been concluded. The FRITZ!Box is ready to use the internet.
FRITZ!Box4040 48
User Interface
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •