Fritz!Box 4040 - Page 75

Requirements
• The FRITZ!Box establishes its own connection to the internet. If the
FRITZ!Box is configured as an IP client that uses the internet con-
nection of another router, you must use the parental controls set on
the other router.
Instructions: Configuring Parental Controls for a Network Device
1. Open the user interface; see page46.
2. Select “Internet / Filters / Access Profiles”.
3. If there is no access profile with the restrictions you want, then
create an access profile:
– For instructions, open the online help .
4. Select “Internet / Filters / Parental Controls”.
5. Click on the “Change Access Profile” button.
6. Assign to the network device the access profile with the desired
restrictions:
– For instructions, open the online help .
Instructions: Blocking a Device
1. Open the user interface; see page46.
2. Select “Internet / Filters / Parental Controls”.
3. Select the network device in the device overview and click on the
“Block” link.
Internet access is blocked for this network device. It is no longer pos-
sible to access the internet from this device.
FRITZ!Box4040 75
User Interface: Internet Menu
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •