Froling FHG - System Current Values Display; Error Message Handling; Customizing Basic Display Parameters

Boiler Control System Lambdatronic S 3200
Page 40
B0600008_US v
4
4.7 Menu - System
4.7.1 Current values
Parameter
Description
Boiler temperature 80°C
Display of the current state values for boiler control system
:
:
Flue gas temperature 167°C
ID fan - control 90%
Primary air 97%
Residual oxygen content 8.0%
Secondary air 36%
Service hours 23h
Service hours in
slumber mode 2.1h
Software version Version: 50.04
Build: 04.12
4.7.2 Error
 See 6.3 Error messages at
Boiler Control System
4.7.3 Basic Display parameters
Basic Display
Description
Position 1
Position 2
The display of the two values in positions 1 and 2 within the
Basic Display can be adjusted individually, and for each position
you can choose from the following parameters:
Boiler temperature, flue gas temperature, Thermal Storage Sys-
tem top temperature, Thermal Storage System bottom tempera-
ture, Thermal Storage System graphic, residual Oxygen, Induced
Draft Fan
repeatedly
repeatedly
repeatedly