Fronius AccuPocket 150/400 - Control Elements and Connections; Safety; Connections and Mechanical Components

21
EN
Control elements and connections
Safety
Connections and
mechanical com-
ponents
(1) (+) current socket
with bayonet latch
(2) (-) current socket
with bayonet latch
(3) Air filter
(4) Charger connection socket
The use of the current connections depends on the welding process:
- MMA welding (depending on electrode type)
(+) current socket for electrode holder or grounding (earthing) cable
(-) current socket for electrode holder or grounding (earthing) cable
- TIG welding
(+) current socket for grounding (earthing) cable
(-) current socket for welding torch
WARNING! Operating the equipment incorrectly can cause serious injury and
damage. Do not use the functions described until you have thoroughly read and
understood the following documents:
- these operating instructions
- all the operating instructions for the system components, especially the safe-
ty rules
NOTE! Due to software updates, you may find that your device has certain func-
tions that are not described in these operating instructions or vice versa. Individ-
ual illustrations may also differ slightly from the actual controls on your device, but
these controls function in exactly the same way.
(1)
(2)
(4)
(3)