Fronius CMT 4000 Advanced Operating Instructions & Spare Parts

129
EN
Unit s
Setting range 0 - 9.9
Factory setting 0.1
GPo
Gas post-flow time
Unit s
Setting range 0 - 9.9
Factory setting 0.5
FDc
Feeder creep - wire feeder creep speed
Unit m/min ipm
Setting range AUT, OFF or 0.5 - max. AUT, OFF or 19.69 - max.
Additional possible setting with SFi option: SFi
Factory setting AUT AUT
NOTE! If Fdc is set to AUT, the value from the welding program database will be
used. If Fdc values are set manually and these values are faster than the wire
feed speed that was set for the welding operation then the feeder creep speed is
equal to the wire feed speed set for the welding operation.
Fdi
Feeder inching
Unit m/min ipm
Setting range 1 - max. 39.37 - max.
Factory setting 10 393.7
bbc
Burn-back time correction
Unit s
Setting range ± 0.20
Factory setting 0
I-S
I (current) - Starting current
Unit % (of starting current)
Setting range 0 - 200
Factory setting 135
SL
Slope
Unit s
Setting range 0.1 - 9.9
Factory setting 1.0
I-E
I (current) - End - Final current
Unit % (of starting current)
Setting range 0 - 200
Factory setting 50
t-S
time - Starting current - Starting current duration
Unit s
Setting range OFF or 0.1 - 9.9

Fronius CMT 4000 Advanced Specifications

General

Brand	Fronius
Model	CMT 4000 Advanced
Category	AC Power Distribution
Language	English