19
EN
Warning notices
on the device
The wire-feed unit has safety symbols on the rating plate. The safety symbols must not be
removed or painted over. The symbols warn against operating the equipment incorrectly,
as this may result in serious injury and damage.
Welding is dangerous. The following basic requirements must be met to en-
sure the equipment is used properly:
- Welders must be sufficiently qualified
- Suitable protective equipment must be used
- All persons not involved must be kept at a safe distance from the wire-
feed unit and the welding process
Do not use the functions described here until you have fully read and under-
stood the following documents:
- These operating instructions
- all the operating instructions for the system components, especially the
safety rules
To Next Page
Loading...
Need help?
General
