General information
Principle The main feature of the new Active In-
verter Technology is intelligent char-
ging. This means that the charging be-
haviour adapts itself automatically to
the age and state of charge of the bat-
tery. This innovation extends the bat-
tery life and reduces the amount of
maintenance required, while at the
same time improving cost-effective-
ness.
Active Inverter Technology is based on
an inverter with active rectification and
an intelligent safety cut-out. The char-
ging current and voltage are held con-
stant by a digital control that is not af-
fected by any fluctuations in the mains
voltage.
Device concept The compact design reduces space requirements and makes portable use con-
siderably easier. Add to this the fact that the active inverters can be used "on-
board". In addition to its many existing features, the charger has a modular
design that makes it easy to upgrade; it is therefore ideally equipped for future
requirements. A wide range of options is available.
Warning notices
on the device
A number of safety symbols can be seen on the battery charger's rating plate.
The safety symbols must not be removed or painted over.
SN:
In:
Out.:
Art. Nr.:
~230V 50/60Hz; xxxW
DC xxV/xxA
A-4600 Wels
www.fronius.com
Selectiva xxxx 1kW
IP 40
Always stop charging before you disconnect the charging cable!
EMC Emission
Class A
xxxxxxxx
xxxxxxxx
4,010,xxx
Use functions only after reading the Operating Instructions in full.
Keep potential sources of ignition such as fire, sparks, and open flames
away from the battery.
Danger of explosion! Oxyhydrogen forms in the battery during char-
ging.
10
To Next Page
Loading...
Need help?
General
