Charging lead
WARNING!
Danger from flying sparks due to improper disconnection of the charging plug.
This can result in severe personal injury and damage to property. The resulting
sparks can ignite the charging gases that form during charging and cause a fire or
explosion
▶
End the charging process via the battery charger and, after the charging
cables have cooled down, wind them up or, if available, place them on the
cable holder.
Safety strategy -
standard protec-
tion devices
The new chargers are not just characterised by purely functional features. In
terms of safety, the active inverters are also equipped to the highest standards.
The following safety features come as standard:
-
Reverse polarity protection prevents the battery or charger from being dam-
aged or destroyed.
-
Short-circuit protection provides effective protection for the charger. The
fuse does not need to be replaced in the event of a short circuit.
-
A charging time monitor provides effective protection against overcharging
and destruction of the battery.
-
Overtemperature protection through derating (charging current reduced if
the temperature rises above the permitted level).
14
To Next Page
Loading...
Need help?
General
