Finishing char-
ging
WARNING!
Danger due to ignition of oxyhydrogen caused by sparks generated when the
charging plug is disconnected prematurely.
This can result in serious injury and damage to property.
▶
Before disconnecting the charging plug, press the Stop/Start button to finish
charging.
1
Press the Stop/Start button to complete charging.
2
Disconnect the charging lead (black) from the negative pole (-) on the bat-
tery.
3
Disconnect the charging lead (red) from the positive pole (+) on the battery.
When the charging contacts are open, the automatic open circuit voltage detec-
tion ensures that the charging contacts are de-energised.
Interrupting
charging
NOTE!
Danger from disconnecting or unplugging the charging lead during charging.
This can result in damage to the connection sockets and connecting plug.
▶
Do not disconnect or unplug the charging lead while charging.
1
Press the Stop/Start button while charging.
-
The process is interrupted.
-
Ready indicator flashes.
2
Press the Stop/Start button again to continue charging.
21
To Next Page
Loading...
Need help?
General
