Only certified, intrinsically safe batteries may be used when charging Li-ion bat-
teries.
For charging Li-ion batteries, a customer characteristic must be used that is spe-
cifically designed for the battery. A standard charging process for Li-ion batteries
is not pre-installed in the battery charger.
-
Li-ion batteries:
LFP, LTO, NMC, NCA, NCO, LMO, LCO.
The device must be handled correctly in order for it to work. Never pull on the
cable when handling the device.
Scope of supply
(1) Battery charger
(2) Operating Instructions
Mains connec-
tion
The rating plate, which is located on the housing, contains information about the
permitted mains voltage. The device is designed for this mains voltage only. The
required fuse protection for the mains lead can be found in the accompanying
characteristic data sheet. If there is no mains cable or mains plug on your version
of the appliance, fit one that conforms to national standards.
NOTE!
Danger due to insufficiently dimensioned electrical installations.
This may result in serious injury and damage to property.
▶
The mains lead and its fuse must be dimensioned to suit the local power sup-
ply. The technical data shown on the rating plate applies.
13
To Next Page
Loading...
Need help?
General
