Fronius Smart Meter IP - Setting the Modbus RTU BIAS

Manufacturer manual
Third party device / Modbus RTU
Manufacturer manual
OPTION 2
max. 300 m
1 = ON
0 = OFF
Manufacturer manual
Manufacturer manual
max. 300 m
e.g. Ohmpilot, Battery
1 = ON
0 = OFF
OPTION 3
Manufacturer manual Manufacturer manual
OPTION 4
max. 300 m
1 = ON
0 = OFF
Third party device / Modbus RTU
Setting the Mod-
bus RTU BIAS
If the Smart Meter is connected to the same Modbus interface (MB0 or MB1) as
the battery, the BIAS switch must be set to ON.
26