Fronius Smart Meter IP User Manual

Contents
Safety rules 5
Safety rules 7
Explanation of safety notices 7
General 7
Environmental conditions 8
Qualified personnel 8
Copyright 8
Data security 8
General information 9
Fronius Smart Meter IP 11
Description of the device 11
Information on the device 11
Intended use 11
Scope of supply 12
Positioning 12
Measuring accuracy 13
Backup power mode 13
Control elements, connections and displays 14
Product overview 14
LED status indicators 14
Installation 15
Preparations 17
Choice of location 17
Installation 18
Checklist for installation 18
Installation 19
Protective circuit 19
Cabling 20
Suitable current transformers 21
Connecting the current transformers 22
Connecting the LAN 23
WLAN configuration 23
Connecting the Modbus RTU 23
Terminating resistors - Explanation of symbols 24
Setting the Modbus RTU terminating resistor 25
Terminating resistors 25
Setting the Modbus RTU BIAS 26
Start-up 29
Commissioning the Fronius Smart Meter IP 31
Opening the user interface with the QR code 31
Opening the user interface with the IP address 31
Software update 32
Fronius SnapINverter 33
General 33
Connecting to the Fronius Datamanager 2.0 33
Configuring the primary meter 33
Configuring secondary meters 34
Modbus participants - Fronius SnapINverter 34
Multi-meter system - Explanation of symbols 35
Multi-meter system - Fronius SnapINverter 36
Fronius GEN24 inverter 38
General 38
Installation using the web browser 38
3

Fronius Smart Meter IP Specifications

General

Brand	Fronius
Model	Smart Meter IP
Category	Measuring Instruments
Language	English