Software update It is recommended to activate the Automatic Updates function during commis-
sioning. The Fronius Smart Meter IP checks for available updates daily and auto-
matically installs them between midnight and 6 o'clock. A precise time can be
set.
If this function is not activated, software updates can also be searched for and
started manually on the user interface of the device.
The software of the Fronius Smart Meter IP is compatible with the following soft-
ware versions of connected Fronius components:
-
Fronius GEN24 & Tauro: full compatibility from version 1.24.1
-
Fronius SnapINverter (Fronius Datamanager 2.0): full compatibility from ver-
sion 3.28.1
-
Fronius Symo Hybrid: full compatibility from version 1.28.1
-
Fronius Wattpilot: full compatibility from version 1.9.29
32
To Next Page
Loading...
