Fronius SYMO Series Installation Instructions

49
EN-US
Seal Conduits
NOTE!
Condensation in the conduits can da-
mage the inverter or the photovoltaic
system components.
To avoid undesirable air circulation and
condensation in the conduits:
► seal all conduits in use with a perma-
nently elastic sealant
► seal every incoming and outgoing con-
duit
► seal both conduit ends.
1
Conduit
Conduit
AC~
Condensation
Air circulation
InsideOutside
DC=
Conduit
Conduit
AC~
InsideOutside
DC=
4
1
3
2
Permanently elastic sealant
Conduit
Inverter housing
Conduit fitting
Permanently elastic
sealant
1
1
Seal all used conduits!
Seal every incoming and every outgoing conduit!
Seal both conduit ends!
1

Fronius SYMO Series Specifications

General

MPPT Number	2
Frequency Range	50 / 60 Hz
Operating Temperature Range	-25°C to +60°C
Communication	WiFi, Ethernet, RS485
AC Nominal Voltage	3 x 230 V / 400 V
Output Voltage	3 x 230 V / 400 V
Warranty	5 years