Fronius SYMO Series Installation Instructions

65
EN-US
Notes on Maintenance
Maintenance Notice! For a horizontal installation position and installation outside: perform an annual
check to ensure that all screw connections are tightly fastened.
Maintenance and service work may only be carried out by Fronius-trained service techni-
cians.
Cleaning Wipe the inverter, if necessary, with a damp cloth.
Do not use cleaning agents, scouring agents, solvents, or similar products to clean the in-
verter.

Fronius SYMO Series Specifications

General

MPPT Number	2
Frequency Range	50 / 60 Hz
Operating Temperature Range	-25°C to +60°C
Communication	WiFi, Ethernet, RS485
AC Nominal Voltage	3 x 230 V / 400 V
Output Voltage	3 x 230 V / 400 V
Warranty	5 years