Fronius SYMO Series User Manual

Fronius Symo 10.0-3 208-240 12.0-3 208-240
CEC efficiency
at 208 V 96.50%
96.50%
at 220 V
at 240 V 96.50% 96.50%
Cooling Controlled forced-air ventilation
Protection class NEMA 4X
Dimensions h x w x d
28.5 x 20.1 x 8.9 in.
725 x 510 x 225 mm
Weight (full/lite version) 90.4/89.5 lbs. (41.0/40.6 kg)
Permitted ambient temperature -40 °F to +140 °F (-40 °C to +60 °C)
Permitted storage temperature -40 °F to +158 °F (-40 °C to +70 °C)
Permissible humidity 0 - 100%
Noise emission 65 dB(A) (ref. 1pW)
Protection devices
Reverse polarity protection Integrated
Stand-alone operation protection Integrated
Arc Fault Circuit Interrupter/interruption Integrated
Photovoltaic insulation monitoring Integrated
High temperature Operating point shift/active cooling
1) The maximum current from the inverter to the solar modules if an error occurs on the inverter.
2) Assured by the electrical design of the inverter
3) ind. = inductive cap. = capacitive
Fronius Symo 10.0-3 480 12.5-3 480
Input data
MPP voltage range 300 - 800 V DC 350 - 800 V DC
Input voltage range (at 1000 W/m²/14 °F in an open circuit) 200 - 1000 V DC
Max. input current (MPP1/MPP2)
(MPP1 + MPP2)
25.0/16.5 A
41.5 A
Max. short circuit current of solar modules (I
SC PV
) (MPP1/
MPP2)
37.5 / 24.8 A
Max. inverter backfeed current to the array
1)
0.0 A
2)
Output data
Nominal output power (P
nom
) 9995 W 12,495 W
Max. output power (+104 °F) 9995 W 12,495 W
51
EN-US

Fronius SYMO Series Specifications

General

MPPT Number	2
Frequency Range	50 / 60 Hz
Operating Temperature Range	-25°C to +60°C
Communication	WiFi, Ethernet, RS485
AC Nominal Voltage	3 x 230 V / 400 V
Output Voltage	3 x 230 V / 400 V
Warranty	5 years