Fronius SYMO Series User Manual

1) The maximum current from the inverter to the solar modules if an error occurs on the inverter.
2) Assured by the electrical design of the inverter
3) ind. = inductive cap. = capacitive
Fronius Symo 15.0-3 208
Input data
MPP voltage range
at 208 V 325 - 850 V DC
at 220 V 340 - 850 V DC
Input voltage range (at 1000 W/m²/14 °F in an open circuit) 325 - 1000 V DC
Max. input current
at 208 V 47.8 A
at 220 V 45.7 A
Max. short circuit current of solar modules (I
SC PV
) (MPP1/
MPP2)
49.5/37.5 A
Max. inverter backfeed current to the array
1)
0.0 A
2)
Output data
Nominal output power (P
nom
) 15,000 W
Max. output power (+104 °F) 15,000 W
Max. output power (+140 °F) 6600 W
Rated apparent power 15,000 VA
Phases 3 ~ NPE
Nominal grid voltage
at 208 V 120 V / 208 V
at 220 V 127 V / 220 V
Operating range AC voltage -12 to +10%
Adjustment range for grid voltage
at 208 V 106 - 132 V / 183 - 229 V
at 220 V 112 - 140 V / 194 - 242 V
Max. continuous output current at V
nom
at 208 V 41.6 A
at 220 V 39.4 A
Recommended min. AC overcurrent protection
at 208 V 60 A
at 220 V 50 A
Max. output fault current per duration 67.7 A / 153 ms
Nominal frequency
60 Hz
Total harmonic distortion < 3.5%
Power factor (cos phi)
0 - 1 ind./cap.
3)
General data
Maximum efficiency 97.30%
CEC efficiency 96.50%
53
EN-US

Fronius SYMO Series Specifications

General

MPPT Number	2
Frequency Range	50 / 60 Hz
Operating Temperature Range	-25°C to +60°C
Communication	WiFi, Ethernet, RS485
AC Nominal Voltage	3 x 230 V / 400 V
Output Voltage	3 x 230 V / 400 V
Warranty	5 years