Fronius TransSteel 2200 - Operational Safety and Environmental Conditions

Tools and measuring devices
Tools required - Torx screwdriver (TX8)
- Torx screwdriver (TX10)
- Torx screwdriver (TX20)
- Torx screwdriver (TX25)
- Torx screwdriver (TX40)
- Box spanner, 8 mm
- Flat spanner, 17 mm
- 2 x flat spanner, 15 mm
- Flat spanner, 19 mm
- Slotted screwdriver, 3 mm
- Phillips screwdriver (PZ2)
- Phillips screwdriver (PH2)
- Torque wrench, 1 - 5 Nm
- BT1 fitting tool (item number 42,0411,0039)
- Torque wrench (item number 42,0411,9040)
- Adjustable spanner insertion tool (item number 42,0435,0229)
Measuring and
testing equip-
ment
- Digital multimeter
- Insulation tester (Metriso 5000)
- Torch flow rate testbox (4,078,016)
- Flow and leak tester
- Manual welding torch testbox (4,045,998)
- Apparatus tester e.g. Fluke 6200
Ancillary materi-
als
- Contact spray or alcohol-based solvent
- Cleaning paper
8