Fronius TransSteel 2200 - Replacing the Solenoid Valve

Replacing the solenoid valve
Replacing the
solenoid valve
(1)
(1)
(1)
(1)
1
Undo the six screws (1) from the back
panel of the device and swing the
back panel to one side
(2)
(3)
2
Unplug the cable (2) from the PC
board (2)
3
Undo size 17mm nut (3) from the
solenoid valve
(4)
(5)
(7)
(6)
4
Unplug cable (4)
5
Remove the hose clamp (5) and the
hose (6)
6
Remove the solenoid valve (7)
7
Fitt the hose (6) with the hose clamp
(5) to the new solenoid valve and plug
in the cables (4) again
35
EN