5
The TransSteel (TSt) 3500 and TSt 5000
power sources are completely digitised,
microprocessor-controlled inverter power
sources.
The modular design and potential for
system add-ons ensure a high degree of
flexibility. The devices are designed for the
welding of steel.
All devices are suitable for:
- MIG/MAG welding
- MMA welding
TSt 3500/5000 power source
The devices are used in workshops and industry: manual and automated applications
with classical steel and galvanised sheets.
The TSt 3500/5000 power sources are designed for:
- machine and equipment construction
- steelwork
- plant and container construction
- shipyards and the offshore industry
- metal and gantry construction
- rolling stock construction
General
Functional prin-
ciple
Device concept
Application areas
The central control and regulation unit of the power sources is coupled with a digital
signal processor. The central control and regulation unit and signal processor control the
entire welding process.
During the welding process, the actual data is measured continuously and the device
responds immediately to any changes. Control algorithms ensure that the specified
target status is maintained.
This results in:
- a precise welding process,
- high reproducibility of all results
- excellent weld properties.
To Next Page
Loading...
